Pricing for Flat Front
with Back Slat in Lining Only
OR Back or Front
Slat Fabric Shades or Relaxed Casual Shades (See Below)
I offer
30-40%
discount on all decorator fabrics. I will be
happy to draw up a custom estimate using any fabric you
choose. Visit the Decorator Fabric link to the left to
see fabric websites.
If you would like to
order fabric samples or have any questions, please
e-mail me at
lynn@lynnchalk.com
. I handle all orders personally, and like
to be sure that all measurements and details are accurate
before beginning any project to ensure complete
satisfaction.
Our
Casual Shades have rings and cords only on the sides with a
fabric covered dowel sewn into the bottom row of rings to
keep the shade taut across, but also giving a gentle drape
on the bottom.
Our Flat
Front Shades feature 3/8" rod pockets with plastic dowel
inserts sewn to the lining of the shade only every 6-8"
apart. The dowel feature is the best way for keeping
shades crisp and neat looking. This way when the shade
is raised, folds form and stack neatly on top of one
another.
Our Front
Slat Shades feature 3/8" rod pockets with plastic dowel
inserts sewn to the front of the shade every 6-8" apart.
The narrow pleats create a nice design detail. When
raised, folds form and stack neatly on top of one another.
Our Back
Slat Shades feature 3/8" rod pockets with plastic dowel
inserts sewn to the back of the shade every 6-8" apart.
This creates a nice design feature, especially when using
plain colored fabrics or stripes. When
raised, folds form and stack neatly on top of one another.
Standard
Roman Shade Headrail with Screw Eyes and Cords mounted on
board.
Continuous
Cord Clutch System mounted on board eliminates hanging
cords. System works on a rotating bead chain to neatly
lift and lower shade.
A Turned
Headrail is a no charge option that reduces the mounting
depth and projection of the shade
Classic Valance
is a no charge option
Pricing Includes Labor for (Slats in Lining Only/Flat Front,
Front Slat or Back Slat) Privacy Lining -
Fabric is
additional. Please see chart below for yardage
estimates.
Size of
Shade
Standard
Headrail with Screw Eyes and Cord
Continuous Cord
Clutch System
Up to 36"
Wide X Up to 60" Long
$275
$350
Up to 36" Wide X
Up to 72"
$295
$370
36" Wide X
84"
$315
$390
36" Wide X
96"
$325
$400
37"-50" Wide
X Up to 60" Long
$305
$380
37"-50" Wide
X 72" Long
$325
$400
37"-50" Wide
X 84" Long
$345
$420
37"-50" Wide
X 96" Long
$365
$440
Pricing Includes Labor for Casual Shade or Flat Roman Shade
without ribs and Privacy Lining -
Fabric is
additional. Please see chart below for yardage
estimates.
.
Use a metal measuring tape, not a ruler or cloth tape
measure. Write your measurements in
the spaces provided
and double-check them!
2
.
Measure all windows, even if they appear to be the same
size.
3
.
With decorative traverse rods or cafe curtains hung by
rings, start measuring from the bottom
of the ring.
INSIDE MOUNT
Mounted within the window
frame
Provides a clean, built-in
look
Great way to leave attractive
woodwork exposed
3/4" minimum depth required
for secure mount
2 1/4" minimum depth required
for flush mount
If window frame isn't deep
enough, please select outside mount
1:
Measure the inside width at the top of the
window. This is your ordering width. We will make the
necessary deductions. (approx. 3/8")
STEP 2: Measure the
height at 3 locations - the left side, middle and right
side. Record the largest of the 3 measurements. This is
your ordering length.
OUTSIDE MOUNT
Great option when there is not
enough depth for an inside mount
Mounted to the wall, ceiling
or molding surface surrounding the window
Often used to make the window
appear larger or to hide a less attractive window or
door
No minimum depth requirement
STEP
1: Measure the width of the area you wish to
cover. This is your ordering width and will
be the overall measurement outside bracket to outside
bracket.
STEP 2: Measure the
height of the area your wish to cover. This is your
ordering length.
